A laptop, a wired GPS, and free charts: navigating the Pacific with OpenCPN

Free software, a wired GPS receiver and downloaded charts turn the laptop already aboard into a chartplotter that needs no connection at all. Here is why it works, and how to set it up.

4 min read

Rugged laptop displaying a nautical chart beside marine maps and compass

Between the atolls there is no cell signal, no chart agent, and no technician. A navigation system that needs a subscription, a login, or a dealer visit is a liability out here.

OpenCPN needs none of them. It is free, it runs on the laptop already aboard, and with a wired GPS receiver and downloaded charts it works with no connection at all. For vessels in the Pacific, it is the best place to start.

OpenCPN: a chartplotter without the hardware

OpenCPN is free, open-source chartplotter software for Windows, macOS, Linux and Android. It is written by active sailors and tested underway, not in a showroom.

It does what a dedicated plotter does. It shows the vessel on the chart, follows a route, and sounds an alarm when something is wrong. The licence costs nothing, for one laptop or for twenty.

Offline first: everything lives on the laptop

Charts, routes, tracks and tide tables sit on the hard drive. Nothing is streamed. When the satellite link drops or the data plan runs out, the plotter does not notice.

One program then carries most of what a wheelhouse needs:

  • Vector and raster charts side by side, with satellite imagery as a third layer.
  • AIS targets on the chart, with collision alerts.
  • GRIB weather files laid over the route.
  • Tide and current predictions by location.
  • Routes, waypoints and recorded tracks, including great-circle routing for long passages.
  • Anchor watch and man-overboard alarms.
  • Output to an autopilot, and a dashboard for instrument data.

Plugins add weather routing, climatology and a logbook. Commercial suites often charge extra for these.

The GPS: use a wire

Most laptops have no satellite receiver of their own. A phone or tablet can share its position over Bluetooth or Wi-Fi, but wireless links drop, pairings fail, and batteries run flat at the wrong moment.

A wired USB GPS receiver has none of those failure points. It draws power from the laptop, sends a position every second, and needs no pairing and no network. The cable also lets the receiver sit where it sees the sky while the laptop stays dry below.

Specify it the way any island hardware should be specified:

  • Choose a plain USB receiver that speaks NMEA 0183. OpenCPN reads it directly.
  • Fix it under a window or a fibreglass deck, clear of metal.
  • Carry a spare. They cost less than a tank of outboard fuel.
  • After the laptop sleeps, check that the position is live again before trusting it.

The result is a fix good to a few metres, updated continuously. On a remote atoll that is often more accurate than the chart underneath it.

Charts: free, official, and updated every week

OpenCPN’s built-in Chart Downloader pulls official charts straight from the agencies that publish them. It checks what is already on the laptop and fetches only what has changed.

Three sources matter most in the Pacific:

  • NOAA publishes vector charts for U.S. waters free of charge, with update files posted every weekday evening.
  • New Zealand’s official raster charts are in the downloader too, and they reach across large areas of the Pacific.
  • LINZ also offers a free South West Pacific vector chart pack, with weekly update notices, to registered users.

Commercial plotters typically charge for chart cards, and again to keep them current. Here the update is a click on the harbour Wi-Fi before departure.

One caution applies to every system out here. Many atoll surveys are old, and the charted reef can sit some distance from the real one. OpenCPN can lay satellite imagery over the chart, which shows where the coral actually is.

Where commercial systems still win

The list is short, but it is not empty.

  • Certification. OpenCPN is not a type-approved ECDIS. Ships required to carry one cannot use it as their primary system, though it makes a capable backup.
  • Coverage. Free official charts follow the agencies that give them away. Outside U.S. and New Zealand-charted waters, you can expect to sometime buy charts or lean on imagery.
  • Hardware. A laptop is not built for spray, sun or a 12-volt supply. It belongs inside, on a mount, with a charger that suits the boat.

None of these is a reason to pay for a closed system on a normal vessel. They are things to plan around.

Getting started: one afternoon in port

  1. Download OpenCPN from opencpn.org and install it on the laptop.
  2. Open Options, then Charts, then the Chart Downloader. Add the catalogues for the waters ahead and download them.
  3. Plug in the USB GPS. On Windows, install its driver first.
  4. Go to Options, then Connections, then Add connection. Choose Serial and pick the GPS from the DataPort list. The quick start manual shows each screen.
  5. Take the receiver outside. The GPS status bar turns green and the boat appears on the chart.
  6. Switch off the Wi-Fi and zoom through the whole route. Any blank area is a chart still to download.
  7. Draw the route, set the anchor alarm, and update the charts once more before leaving.

Keep a paper chart and a handheld GPS in a dry bag. The rule of thumb for electronics out here applies to navigation too: one of anything is none.

The Island Test

Seven questions before any technology comes ashore.

Will it survive the air? The worst day? Who fixes it? Where are the spares? Does it need the internet? Does it fit our power? What does it cost over its life? Read the full test →

More from the Field Guide